Window repair in Cyprus is needed more often than you might think: sun, heat, sea salt and dust wear out seals and hardware quickly, and sashes drop over time. Cozy brings together specialists in window repair and installation who work with aluminium windows as well as uPVC and timber. Jobs range from adjusting a sash to replacement windows and doors for a flat or villa.
If you are replacing doors as well, see door installation and repair, and for glazing a balcony or loggia, see balcony glazing and finishing. Car glass is not repaired in this section.
Survey and frames: aluminium, uPVC or timber windows
For replacement windows, the specialist first surveys the opening: width, height, depth of the reveals and the condition of the wall around the frame. The profile, opening type and glass unit are then chosen from these measurements. Aluminium windows are the most common choice in Cyprus: the profile is strong, allows large sliding sashes and does not warp in the sun, while a thermal break reduces heat gain. uPVC windows keep out heat and noise well and are easy to maintain. Timber windows suit traditional stone houses and restoration, but they need staining and painting.
Discuss with the specialist which sashes should open, whether you need insect screens, tilt-and-turn opening for ventilation and solar control glass for south- and west-facing windows. What else to look for in windows for strong sun is covered in our article “Windows for a sunny climate: what to look for”.
Adjustment and seals
If a window is draughty, the sash catches on the frame or the handle is stiff, a repair is usually enough: to repair double glazed windows you rarely need to replace them. Typical jobs:
- adjusting the sash and seasonal compression;
- replacing seals that have dried out in the sun;
- repairing or replacing handles, hinges and locking gear;
- repairing rollers and tracks on sliding windows;
- cleaning and lubricating hardware, clearing drainage slots.
Double glazing repairs: glass and sealed units
Condensation between the panes means the sealed unit has lost its seal. Like cracked glass, it is usually replaced without removing the frame: the specialist takes off the glazing beads, measures the unit and orders a new one to size. You can upgrade to a warmer, acoustic or solar control unit at the same time if the profile allows. In old timber windows, the glass is sometimes replaced in place with new beads or putty.
Window installation: junctions and sign-off
The quality of window installation depends largely on the junctions: the gap between frame and wall is filled with foam and protected from moisture and sun, a sill is fitted outside and the reveals are finished inside. At sign-off, check that the sashes open and close without effort, the frame is level, the drainage slots are clear and the joints are sealed on both sides. After the first heavy rain, it is worth checking the sill and reveals for any sign of water.
Choosing a window fitter
Look for experience with your type of system: the profile and reviews usually show whether someone works with aluminium, uPVC or timber. Compare photos of completed jobs, the rating and what the price includes: removal, disposal of old windows, finishing the reveals, follow-up adjustment.
Markings on the profile or glass unit often identify the system, so photograph them along with the hardware and the whole window from both sides. Add the sash or opening size and say what is wrong. For replacement windows, give the number of windows, the floor and whether there is outside access.













